Healthcare
Emergency Care & Resuscitation

Söktermer

HeartStart OnSite/HS1

AED

Product number:

M5066A

The Philips OnSite/HS1 is designed for the ordinary person in the extraordinary moment. It is easy to set-up and includes automatic Life Guidance features like voice prompts and CPR coaching to help guide you through the treatment of sudden cardiac arrest.

Contact Us

Kontaktinformation

* Detta fält är obligatoriskt
*

Kontaktuppgifter

*
*
*

Företagsinformation

*
*
*
*
*

Kommunikationsdetaljer

Genom att specifiera anledningen till att du kontaktar oss, kan vi ge dig en bättre service
*
*

Vad betyder det här?

Media Gallery

  • Step-by-step guidance so you know exactly what to do

    OnSite has a clean and simple interface that’s easy to use and understand. Its voice instructions guide you through the entire process, from placing the pads, to delivering a shock, to performing CPR. You won’t get lost because the intelligent sensors can detect what step you’re on and adjust to your level of expertise.

  • Ready to use when you need it

    Setting up the OnSite is easy and quick. The pads and battery are already installed. Just pull the green tab to launch the initial self-test. After that, the OnSite performs daily self-tests so you can trust that it is ready-to-go if needed.

  • Instructions that adapt to your pace

    When you place the SMART pads on the victim’s bare skin, they adapt the defibrillator’s instructions to your actions. They follow your pace so they don’t overwhelm, run ahead, or slow you down. If needed, the prompts are repeated or rephrased, sometimes even including additional instructions to help you understand.

  • Fast shocks to improve treatment success

    Since minimizing the time to shock after the last CPR compression may improve survival, shock delivery time is critical. The Onsite is among the fastest in class at delivering shock treatment after CPR*.

  • Personalized therapy for each patient

    Before you can deliver a shock, the OnSite automatically checks to make sure a shock is necessary and that the right therapy is given. If you install the infant/child SMART Pads, the defibrillator will automatically adjust to a lower energy level and modify the coaching instructions to provide infant/child CPR.

  • Easy to train your team

    The OnSite easily converts to a training unit when you attach training pads—no need to purchase separate equipment to practice rescue scenarios with your team. These special pads prevent the defibrillator from delivering a shock and activate its training mode which includes eight different emergency scenarios.

    Specifications Visa mer

    Battery
    Type
    9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells
    Capacity
    Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003)
    Install-by Date
    Battery is labeled with an install-by date of at least five years from date of manufacture
    Standby Life
    Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses)
    Product Specifications
    Kit Contents
    Defibrillator, battery (one, pre-installed), SMART Pads (one set, pre-installed), set-up/maintenance guide with expiration date tags, owner's manual, quick reference guide
    Waveform
    SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance
    Defibrillation peak current - Adult
    32 A (150 J nominal) into a 50 ohm load
    Defibrillation peak current - Pediatric
    19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge)
    Shock-to-Shock Cycle Time
    Typically less than 20 seconds between shocks in a series
    Quick Shock
    Able to deliver a shock after the end of a CPR interval, typically in eight seconds
    Voice Instructions
    Detailed voice messages guide responder through use of the defibrillator
    CPR Coaching
    Instructions for adult and infant/child CPR available at user selection
    Shock Delivery
    Via adhesive pads placed on patient's bare skin as illustrated on pads
    Controls
    Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock button
    Indicators
    Ready light, blue i-button, caution light
    Environmental/Physical Requirements
    Sealing
    Solid objects per EN60529 class IP2X; Drip-proof per EN60529 class IPX1
    Operating Temperature
    0 - 50 °C (32 - 122 °F)
    Standby Temperature
    0 - 43 °C (32 - 109 °F)
    Operating Humidity
    0 to 95 % relative humidity (non-condensing)
    Standby Humidity
    0 to 75 % relative humidity (non-condensing)
    Operating Altitude
    0 to 4,500 m (0 to 15,000 ft)
    Standby Altitude
    <gt/> 48 hours from 0 to 8,500 ft and <lt/>48 hours from 8,500 to 15,000 ft
    Shock/Drop Abuse Tolerance
    Withstands 1 meter drop to any edge, corner, or surface
    Vibration
    Meets EN1789 random and swept sine, road ambulance specification in operating and standby states
    EMI (Radiated/Immunity)
    Meets EN55011 Group 1 Level B Class B and EN61000-4-3
    SMART Pads
    Energy delivered
    Adult: nominal 150 joules into a 50 ohm load; Infant/Child: nominal 50 joules into a 50 ohm load
    How Supplied
    Disposable cartridge, containing adhesive defibrillation pads, clicks into defibrillator for an integrated pads solution
    Active Surface Area
    85 cm² (13.2 in²) each
    Cable Length
    Adult pads: 137 cm (54"); Infant/Child pads: 102 cm (40")
    Use-by Date
    Cartridge is labeled with a use-by date of at least two years from date of manufacture
    Training pads (optional)
    Special pads put HeartStart OnSite into training mode and disable its energy delivery capability. Training pads feature 8 real-world training scripts. Use with training mat (included) or with adapters on manikins
    Automated and User-activated Self-tests
    Daily Automatic Self-tests
    Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacity
    Pads Integrity Test
    Specifically tests readiness-for-use of pads (gel moisture)
    Battery Insertion Test
    Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readiness
    Status Indicator
    Blinking green "Ready" light indicates ready for use. Audible "chirp" indicates need for maintenance
    Data Recording and Transmission
    Infrared
    Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocol
    Data Stored
    First 15 minutes of ECG and the entire incident's events and analysis decisions
    Visa mer

    Documents

    View all

    Related products

    By clicking on the link, you will be leaving the official Royal Philips Healthcare ("Philips") website. Any links to third-party websites that may appear on this site are provided only for your convenience and in no way represent any affiliation or endorsement of the information provided on those linked websites. Philips makes no representations or warranties of any kind with regard to any third-party websites or the information contained therein.

    I understand